Family of Products
Brake & Fuel Lines Proportioning Valves Rear Drum Brakes Rubber Brake Hoses Brake Clips & Clamps Straight Length Tubing OEM Gas Tanks Detail Tags	Parking Brake Cables Disc Brake Conversion Inline tube Exhaust Stainless Braided Hoses Street Rod Plumbing Plumbing Tools Fuel Sending Untis Assembly Manuals

1966 GM A-Body - Chevelle / GTO / 442 / Gran Sport Disc Brake Conversion

DBK6606 - 66 A-Body Power Disc Brake Conversion Kit (Chevelle / GTO / 442 / GS) - $749.00
This kit is for cars converting to disc brakes that are concerned with stock appearing components. This is the most stock appearing kit on the market. It features the correct 9" Delco booster with the correct bleeder master cylinder and the correct frame mount distribution block. Once the upper kit is installed, even the purest will take a second look. The master cylinder lines route the same as the originals, and the double distribution block allows you to use the rest of your existing lines. This kit has everything you will need for your conversion. It even comes with the rubber flex hose frame mounts and bolts. This is truly the most complete kit on the market.

Some companies say they have a complete kit, but where are the frame brackets, flex hoses, hard brake lines, vacuum hose, and distribution block? All other kits on the market have you making up your own lines and fabricating pieces just to get the kit to work. NOT ANYMORE. While the other guys leave you hanging with generic parts, we included it all, right down to the plumbing. Here at Inline Tube, we work on our own cars and want the same thing you do - a complete kit with all the pieces that installs in a few hours.


Complete Kit Includes (All New Parts): Spindles with Bearing and Seals, Rotors, Backing Plates, Loaded Calipers with Pads, Caliper Brackets, 9" Exact Delco Booster, Bleeder Master Cylinder, Dual Distribution Block, Adjustable Prop Valve, Master Cylinder Brake Lines, Brake Hoses with Banjo Bolts and Crush Washers, Frame Brackets and Bolts, Booster Vacuum Hose and Installation Instructions. These are all brand new parts! 

More Details - Our factory style disc brake conversions are based off all factory components. Although you could not get disc brakes in 1966, if you could, this is what they would look like. The master cylinder is the 1967-69 disc brake bleeder master cylinder. The booster is the 1964-66 A-Body booster that would have been on the car if you ordered power brakes. The distribution block mounts in the same location and is separated into front and rear. This allows the adjustable proportioning to be plumbed into the 1/4" front to rear brake line to reduce the pressure to the rear brakes. By having this distribution block in the right location, it allows you to reuse your existing right & left front and front to rear brake lines. The adjustable prop valve can be plumbed anywhere in the front to rear line. The lower wheel kit is 1969-72 A-Body using the improved single piston caliper. Although 1967 had the dual piston calipers, the single piston proved to be a problem free caliper with superior design. All the components are stock, so 20 years from now if you have to replace the brake pads, they will be available.

Some companies use the brass 5 port valve, but this valve is mounted up at the master cylinder. No A-Body valve was ever mounted at the master. You also have to make all new lines that do not look factory because of the placement and the amount of ports in the valve. Other companies supply only the adjustable valve, and since there is no distribution block, there is no way to separate the front system from the rear except to cut up your lines and try to make something work. Most other companies supply smooth boosters and generic master cylinders so the kit price can be reduced. Our kit also uses the correct standard 7/16"-20 caliper, not a late model metric caliper, so when you mount the brake hose it screws right in with no adapter. We also provide the right length brake hose and the frame mounting brackets so your hose will hook up with no washers, adapters or generic parts. Not all disc brakes are the same! With the prices of stock muscle cars at an all time high, the more stock and correct the car is, the higher the return on your investment. 

All 1964-66 GM cars had a single master with drum brakes. 1967 was the first year for disc brakes, but they used dual piston calipers. 1968 was the last year of the dual piston caliper. 1969-74 all used the improved design single piston caliper. This disc brake conversion uses the improved single piston caliper.  All cars before 1967 had no proportioning valve, just a distribution block on the frame. 1967 factory disc brake cars also had a distribution block, but it worked in conjunction with a barrel-shaped hold valve that hung off the stud of the master cylinder making this a two part valve. In 1971, a new one piece improved design was implemented and this valve was not succeeded until 1986.

All conversions use factory components so they will work with stock 14" wheels.

Upgrades for Above Kits:

Delco Exact Original 11" Booster - Free