RV-10

Residual Valve - Street Rod

Street Rod - 10psi Residual Valve - Red - Drum Brakes 

Red
$22.00

Residual Valves:
These valves are used in brake systems where the master cylinder is mounted lower than the calipers or typically under the floor. This is a check valve that keeps either 2lb or 10lb of pressure in the system to prevent the fluid from running back and over flowing the master cylinder. These valves should be mounted as close as possible to the master before the prop. valve. These valves are not needed on firewall mounted master cylinders. 

 

Inline Tube is proud to be the largest aftermarket tube manufacturer in the country. In addition to our trade marked Inline Tubes, don't forget to view our exclusive E-Strength parking brake cables, Hold Tight brake and fuel line clips, Power Braid stainless hose assemblies, as well as our new detail tags, brass hose tees, proportioning valves, disc brake conversions, drum kits and underbody hardware.
Click here for the Inline Tube home page
Only Inline Tubes are manufactured using state- of- the- art computer technology that is 2004 and newer with our exclusive laser scanner for bending and safety inspection. This means the highest quality parts at the best price shipped within 24-48 hours after ordering.