Family of Products
Brake & Fuel Lines Proportioning Valves Rear Drum Brakes Rubber Brake Hoses Brake Clips & Clamps Straight Length Tubing OEM Gas Tanks Detail Tags	Parking Brake Cables Disc Brake Conversion Inline tube Exhaust Stainless Braided Hoses Street Rod Plumbing Plumbing Tools Fuel Sending Untis Assembly Manuals

VCH104 - 1964-67 Chevy Chevelle / El Camino - Conversion to Front Disc 
VBU103 - 1964-67 Buick Skylark - Conversion to Front Disc
VOL102 - 1964-67 Olds Cutlass / 442 - Conversion to Front Disc
VPL103 - 1964-67 Pontiac LeMans / GTO - Conversion to Front Disc

Disc Drum Proportioning Valve

1964-67 Chevy Chevelle / El Camino - Conversion to Front Disc 

Brass
$85.00

GM Valve Notes:
1964-66 cars all had a single master cylinder with drum brakes. There was no proportional valve and no disc brakes available in these years. The tee block that mounted to the frame served as the distribution block. When converting to disc brakes, the system will need a prop. valve. This aftermarket valve mounts on the frame similar to the 67 cars, or on a bracket below the master.

1967-70 cars all had a dual master cylinder and were available in drum, and 1967 was the first year for disc brakes. If the car had drum brakes, there was a distribution block with a built-in brake warning switch. If the car had factory disc brakes, it used the drum dist. block in conjunction with a disc brake hold off valve, which made the disc cars a 2 part valve. For disc brake conversions, replacement aftermarket 1 piece valves are available, see listing. This valve will not plumb into existing factory lines. 

---

This valve is intended to mount off a bracket at the master cylinder.

If converting any of the above disc/drum cars into 4 wheel disc, Inline Tube offers a disc/disc valve that is identical to the disc/drum valve. This valve is metered for 4 wheel disc pressures.

Options:

DVD-01   Disc/Drum Brake Conversion Prop. Valve Kit as pictured  $120.00 OEM
DVD-01A Disc/Drum Brake Conversion Prop. Valve Kit as pictured  $125.00 SS
Pieces of the kit
PR100    Disc / Drum Prop Valve $75.00
PR101    Disc / Disc Prop. Valve $89.00
BRK-01   Gold Zinc Brake Conversion Valve Bracket $18.00
LNK-13   Conversion Prop. Valve Lines 2pc OEM $18.00
LNK-12   Conversion Prop. Valve Lines 2pc SS $25.00

Disc brake conversion line sets are available to plumb this valve into the brake line system. The set includes every hard line in the system from the front to the back and is a complete preformed hard line set. Stainless $175.00 OEM Steel $150.00

---