GM X-Body Distribution Block
PR-110 - GM X-Body Distribution Block - Does Not come with bracket
- $75.00
PR-110A - GM X-Body Distribution Block - Comes with bracket - $85.00
Applications:
1970-74 X-Body Nova / Ventura / Apollo / Omega
Mounted on the master cylinder stud, for drum and disc cars
Front to rear brake line fitting blue 9/16-18 thread
Cast Iron Painted Black
.JPG)
Valve Notes:
Now available is the 1970-74 X-body Nova / Ventura /
Apollo
Distribution Block. This block was used on all cars either disc or drum. The
block is bolted below the master cylinder. This is not a proportioning valve; it
does not hold off pressure except if there is a loss of pressure in either the
front or rear it will contact the brake light in the dash. In 1967-69 and 70-74,
this block is used on all drum cars, and in 1967-70 with the round hold off valve
at the master on disc brake cars. In 1971, the disc brake cars use a different
valve and the drum brake applications continue to use this valve. This block
gives equal pressure to the front and rear brakes and is also great for 4 wheel
disc applications.
This item is an exact reproduction featuring a cast body, the correct bracket,
black plating and working insides. You will also find with current manufacturing
procedures, the reproduction has no tool stamping marks and the edges of the
part are much cleaner than the original.
Prop. Valve Brackets are also available separately, this bracket is $12.00.
