|
| |
DVD-04 - Disc/Drum Proportioning Valve / Bracket Set OEM- $140.00
DVD-04a - Disc/Drum Proportioning Valve / Bracket Set Stainless- $150.00
Applications:
1971-72 A-body - Chevelle / El Camino / Lemans / GTO
/ Cutlass / 442 / Skylark - Factory Disc
Brakes
1971-72 A-body - Monte Carlo / Grand Prix - Factory Disc Brakes
1968-72 A-body - Chevelle / El Camino / Lemans / GTO / Cutlass / 442 /
Skylark - Disc Brake Conversion
  
1971-72 A-body Disc Brake
Valve, Lines & Bracket
Details:
This item is an exact reproduction of the 1971-72 A-body disc brake bracket. All
factory disc brake cars had this bracket to mount the proportioning valve to the frame.
Drum brake cars did not have this bracket, only the front disc cars. If the car
is being converted to disc brakes, this item is a must to place the valve in the
right location so the factory lines will bolt into the correct location. Disc brake
conversion companies use the wrong bracket that mounts the proportioning valve up by the master
cylinder. All 1968-72 A-body cars mount the valve at the frame. The valve will
only mount correctly with the use of this bracket.
This bracket may also be used if converting a 1968-72 A-body to disc brakes using
the GM 5 port valve. This bracket mounts the valve in
the proper location on the frame instead of up by the master cylinder.
Pieces of the Kit
PR100 Disc / Drum Prop
Valve $75.00
PR101 Disc / Disc Prop. Valve $89.00
BRK-04 Phosphate Brake Valve Bracket $22.00
xxx 71-72 GM A-body Prop. Valve Lines 2pc OEM
$25.00
xxx 71-72 GM A-body Prop. Valve Lines 2pc SS
$35.00
Disc brake conversion line sets are available to plumb this
valve into the brake line system. Set includes every hard line in the system
from the front to the back and is a complete preformed hard line set. Stainless $175.00
OEM Steel $150.00
|
