Family of Products
Brake & Fuel Lines Proportioning Valves Rear Drum Brakes Rubber Brake Hoses Brake Clips & Clamps Straight Length Tubing OEM Gas Tanks Detail Tags	Parking Brake Cables Disc Brake Conversion Inline tube Exhaust Stainless Braided Hoses Street Rod Plumbing Plumbing Tools Fuel Sending Untis Assembly Manuals

BLK500

1963-65 Corvette Distribution Block 

Tee Block - Brass 4 Port Valve  Front Drum - Rear Drum 

Brass
$22.00

Valve Notes:

For use on 1963-65 factory drum cars.

This is the distribution block that is mounted below the single master cylinder which feeds fluid to all four wheels. 1963-65 cars have a 1/4" master cylinder line while the rest of the lines are 3/16". This block is not correct for 1966, these cars had a 1/4" front to rear brake line which makes the rear port larger. This is an exact reproduction down to every detail. It is the correct size shape and thickness, made of brass with a phosphate bracket. These blocks are often missing, thrown away, or stripped. 

1963-65 cars all had a single master cylinder with drum brakes, there was no proportional valve and no disc brakes available in this year. The tee block that mounted to the frame served as the distribution block. When converting to disc brakes the system will need a prop. valve. This aftermarket valve mounts on the frame similar to the 63-65 cars or on a bracket below the master.

1967-70 cars all had a dual master cylinder.  

---